Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PS4 => PS4 Controllers/PS4 Rapid Fire Controllers => Topic started by: fede19802022 on November 28, 2023, 03:51:05 AM
-
Hi everyone
I have a problem with the R3 key does not work as I do to recover the functionality
Thank you
https://imgur.com/FYiorpz
https://imgur.com/a/FH5lQ9q
-
First check continuity between the spot in the red circle, and the orange dot to the right of it. Press the button and make sure the value goes close to 0ohms when pressed. Just becasue those buttons 'click' when pressed does not mean they are good.
If the button tests good, then solder a jumper wire and connect the 2 Orange spots. Also make sure the solder joint in the Red circle is good making connection to that trace there.
(https://www.acidmods.com/RDC/DS4/Repair/fede19802022_EzvFxSW.jpg)
-
Hi
There is continuity between the red circle and the orange dot on the right while I press the button I made the jumper between the two orange dots (as you can see from the photo) but it still doesn't work
thank you very much for helping
https://imgur.com/a/EdEGZPs
-
Follow the trace from the red circled spot and make sure it's not damaged anywhere.
-
HI
I have attached the completed photo of the motherboard, can you help me find the trace
Thank You
https://imgur.com/iQ6jOi8
-
Pic isn't that great, trace looks open here though.
(https://www.acidmods.com/RDC/DS4/Repair/fede19802022_iQ6jOi8.jpg)
-
yes the point is right how can I restore the line
Many many Thanks
-
Resolved.
Thanks