Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => Xbox 360 Soft mods / JTAG support => Topic started by: Luigus on November 19, 2012, 04:55:52 AM
-
Hey again, so I'm making a sputnik probe for myself, and i decided to go the extra mile and make a etched PCB board for it.
So of course there no schematics of the thing around :rofl:... lol
So i drew up one of what i knew from reading of people doing it the most simple way, just a resistor to the MPX01 point on the Drive mobo. But i see that the Sputnik Probe actually has a LED that lights up when you touch the probe to the appropriate MPX01 point. So that's what my question is.
Here's my schematic:
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi1193.photobucket.com%2Falbums%2Faa360%2FEndo63%2FUntitled.jpg&hash=a6d7d6dc39e8caa9541f399f82646786de8f06f9)
I tested the MPX01 point to ground with my multimeter and the point gives off about 3.1V, so can i just put a led between the probe and the GND from the resistor, like in the second schematic on the image.
I see that the sputnik original has i think 2 transistor in, can anyone identify them maybe? or send me a nice close up pic of the tracks.
Thanks
`Luigus