Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => PS4 => PS4 Controllers/PS4 Rapid Fire Controllers => Topic started by: Dark Knight_TJ on April 06, 2017, 03:08:32 PM

Title: ps4 wireless controller jdm-011 resistor values
Post by: Dark Knight_TJ on April 06, 2017, 03:08:32 PM

hello guys!

i saw this is a great forum for talking about ps4 controllers and i'm having some troubles with one of them. it has a jdm-011 motherboard but actually is not korking anymore because 2 resistors burnt, can someone please tell me which value are they?. thanks in advance.

http://es.tinypic.com/view.php?pic=1535i83&s=9#.WNmPKGejmUk

Title: Re: ps4 wireless controller jdm-011 resistor values
Post by: RDC on April 10, 2017, 12:15:57 AM

They are both 2.7k but if they are fired then I would seriously doubt replacing them will correct any issues, as they are just a couple of Pull-Ups on some control or data lines. That thing probably has at least 1 fried IC now as well.

Title: Re: ps4 wireless controller jdm-011 resistor values
Post by: Dark Knight_TJ on April 10, 2017, 02:19:22 PM

Thanks For answering.  Actually controller no longer charges or turns on. Measured voltaje near battery and shows near 2.3v  which i think is not enought for charging nor turning on,  am i wrong?

Title: Re: ps4 wireless controller jdm-011 resistor values
Post by: RDC on April 10, 2017, 04:59:10 PM

It's a single cell LiPo, so it should be 4.1v/4.2v when charging and no less than around 3.2v or so ever. If the battery alone measures 2.3v then it's most likely bad now as well.