Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => Xbox One => Xbox One controllers/Xbox One Rapid fire Controllers => Topic started by: mecedes on February 24, 2020, 02:23:13 PM
-
Hi, I had RH joystick drift so replaced the thumbstick with a genuine ALPS part, although these sensors are black and the original was green. At first the stick was stuck in the NW position, I then found that the trace must have damaged for the AN+ connection on the X and Y sensors so I made a bridge between + on RSY and + on LSY. Everything is working good now but I am experiencing high battery drain now where batteries that are 50% worn show full and when they are 25% the controller turns off without warning but those batteries still work in other controllers. Is it possible that something is shorted and causing the high drain?
-
If it was actually draining the batteries they would measure the same in another controller. Sounds more like something is screwy with the way it's monitoring the battery voltage.
-
Thanks, I bench tested it again this time with a USB cable and measured all of the voltages at the pots and everything was perfect. After I reassembled it and connected it to the console via wireless it seemed to read the voltages correctly. Fingers crossed that it just needed to somehow reset. Thanks for your help. I stumbled across this site after I had already firstly fitted a cheap eBay thumbstick without knowing the difference which was far too sensitive and the information here saved me buying a new controller. Much appreciated.