Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => Xbox One => Xbox One controllers/Xbox One Rapid fire Controllers => Topic started by: TimeToRelax on March 29, 2024, 12:39:49 PM
-
Hello
First of all, thank you for making a schematic for various controllers.
It made my life so much easier with troubleshooting and repair.
I've replaced a lot of analog sticks in Xbox controllers, and I have used two potentiometers for calibration so far and had great success with them.
After Microsoft introduced software calibration with a new firmware update, I gave it a shot on my test controller, but it seems that something is wrong with the calibration tool.
I did the calibration of two new sticks, and after doing full circles a few times in the tester, my left stick was pushed to the max left and the right one to the down.
After disconnecting the USB cable and plugging it back in, sticks are back in the centre but after doing full circles a few times it does the same thing.
Here is a test video that I recorded from a gamepad tester
https://www.youtube.com/watch?v=ivx0zVsRNtg.
Has anybody encountered the same issue or have any thoughts about this?