Acidmods

AcidMods Resources ----- ( These are helpful tools for modding ) => Pic Programmers and Programs => Hardware => Topic started by: DDjusD on April 26, 2010, 05:49:10 PM

Title: common PIC microcontroller used in modding
Post by: DDjusD on April 26, 2010, 05:49:10 PM

-snip-

Title: Re: common PIC microcontroller used in modding
Post by: crazy-modder on April 26, 2010, 06:20:46 PM

Hers the programmer i use

http://cgi.ebay.com/PIC-USB-programmer-Microchip-ICSP-12F683-JDM-FromCanada-/290429407520?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item439ef11120 (http://cgi.ebay.com/PIC-USB-programmer-Microchip-ICSP-12F683-JDM-FromCanada-/290429407520?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item439ef11120)

It works with pretty much all the common pics, and the most common is 12f683.  Especially for rapid fire controllers, and led mods.  Such as making chasing leds or flashing leds, etc.

Title: Re: common PIC microcontroller used in modding
Post by: DDjusD on April 26, 2010, 06:29:32 PM

-snip-

Title: Re: common PIC microcontroller used in modding
Post by: crazy-modder on April 26, 2010, 06:50:39 PM

Lol ya, thats a really nice programmer.  But do you really think you will be using all those pics listed??  If you just want to do the basics, the only chips you will need are the 12f683 and one of the 16 series.  Every hex on this site except for i think one, use a 12f683 pic.

Title: Re: common PIC microcontroller used in modding
Post by: DDjusD on April 27, 2010, 01:18:29 PM

-snip-