Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PS4 => Tutorials => Topic started by: WHITE 4ND N3RDY on October 09, 2015, 06:38:20 PM
-
This is somewhat a loosly based toutorial of how to install a ragnarok chip with 5 remappible tac switches. If u buy a kit from vikingdigital.com they have downloadable pdfs on all the installation and prep work. Though this is nice Its not very specific so I posted a little walkthrough of a build I did. I don't feel like re posting and downloading a bunch of pics again so I will leave a link to the Viking forums where I posted my walkthrough. I encourage others to give it a shot.
The ragnarok chip has been updated so I can now have up to 5 remmapible tacs and the price is right to move! This now blows all other mod chips on the market out of the water. Console customs has nothing on the new ragnarok chip.
So enough blabering on, below is the link to my build and if u are serious about doing this my build will help u out in all the gray areas in the Vikings pdfs.
https://forums.vikingdigital.com/threads/sick-ps4-rag.6414/ (https://forums.vikingdigital.com/threads/sick-ps4-rag.6414/)
-
I wanted to make a video showing how to daisy chain all your tac switches together for the ps4 rag chip rev c. The video quality is poor at best but will show u easier method of wiring your tac switchs for better wire management with fewer wires. I know my setup is still hideous and sloppy but I'm a very inpatent modder and I do my personal installs sloppy and fast. I want to help others out who may has issues installing this mod chips. This will save u time and most important space, in the crammed ds4 controller. So without further ados heres my video to help u out!
https://m.facebook.com/story.php?story_fbid=1013958358664608&id=100001513613563 (https://m.facebook.com/story.php?story_fbid=1013958358664608&id=100001513613563)
-
Thanks Nerdy