Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => Legacy Consoles => Topic started by: Brian 503 on June 16, 2018, 08:51:28 PM
-
Been absent for a while but while I was inactive here I made a nes joystick with real joystick and 24mm hori push buttons
Space in this shell is extremely limited, this requirs heavy shell modifications and pcb drilling and re routing traces
I banged the build out in 7 hrs which was no easy feat. Here's some pics of my re-done nes arcade stick.
(https://s15.postimg.cc/msdy1gqzb/20180604_222011.jpg) (https://postimg.cc/image/msdy1gqzb/)
(https://s15.postimg.cc/896t01ap3/20180616_203712.jpg) (https://postimg.cc/image/896t01ap3/)
My iron died during the build (rod was done)
I basically just slammed this out. The case was already beaten up so I just slaped stickers everywhere. Its not pretty but its fully functional and a million times better than the stock version. Hope u all like it.