Acidmods
AcidMods Resources ----- ( These are helpful tools for modding ) => Open Source Code & AcidMods Free Code => Topic started by: tempermodz on July 03, 2011, 02:32:01 PM
-
on the diagram do u need the brown line on the 5th pin ? also is there a diagram for cg2 and matrix if that is necessary
-
no the brown line does nothing it was just put there to trick people, YES OF COURSE YOU NEED THE BROWN LINE THAT IS THE Y BUTTON CONNECTION.
And dude seriously read the thread Reply #22 has everything you want. (https://www.acidmods.com/forum/index.php/topic,38335.0.html)
-
man, that does not work in Matrix 1 or 2, only in CG/CG2
-
Yeah.. What type of optocoupler does the cg2 needs?
Thanks
-
Yeah.. What type of optocoupler does the cg2 needs?
Thanks
You need a OPIA4010 or anything similar.
Datasheet: http://www.optekinc.com/datasheets/OPIA4010D.pdf
(Thanks Hyper)
Wiring the optocoupler up: https://www.acidmods.com/forum/index.php/topic,34805.0.html
(Thanks RDC)
-
I got some couples, they look exactly like a pic but with 4 pins. How do I tell wich is wich, like the pins
There's a lil notch as well . But smaller then the pic.
-
I got some couples, they look exactly like a pic but with 4 pins. How do I tell wich is wich, like the pins
There's a lil notch as well . But smaller then the pic.
Google "(insert part number here [its probably written on the top]) datasheet" then find a pdf, open it and it will have a diagram showing you which is which.
-
:fear: umm hey guys i know im out of topic but in robbos jitter it the 12f683 in a dead bug possition or how? i cant seem to figure it out
-
:fear: umm hey guys i know im out of topic but in robbos jitter it the 12f683 in a dead bug possition or how? i cant seem to figure it out
if you look on the chip there is a dot above one of the prongs and a notch at one end of the chip the dot and the notch should be on the same end
the dot is where the red is shown in the pic for power this should also be the #1 post on the chip
(https://www.acidmods.com/forum/index.php?action=dlattach;topic=38335.0;attach=2713;image)
-
if you look on the chip there is a dot above one of the prongs and a notch at one end of the chip the dot and the notch should be on the same end
the dot is where the red is shown in the pic for power this should also be the #1 post on the chip
(https://www.acidmods.com/forum/index.php?action=dlattach;topic=38335.0;attach=2713;image)
To install it is best to flip it over dead bug. Just mark pin 1 as rodent said and work from their.
-
so lets say i put the chip on dead bug position with the notch on top ...witch means the pin in the right top corner will be #1 right
and thanks for the quick responses
-
so lets say i put the chip on dead bug position with the notch on top ...witch means the pin in the right top corner will be #1 right
and thanks for the quick responses
there is a dot that would be where the #1 pin or in this pic would be the red wire to positive. so if you flipped it upside down then it would be on the right unless you flipped it the wrong way.
-
um ok i have a diferent type of question so i made my own jitter mod right and i had to connect the wire that normally goes to the left trigger and connect it to the x button and added a momentery push button. and the right triger towards y but it also does rappid fire ..than i aded an on off switch for the conection towards y ..so when ever i use my jitter i need to hold the momentary button and the right trigger at the same time ..it works good but when ever i dont press it at the right time it messes up a little is there any way i could add something to make both things work with out the momentary button and just use the right trigger ..ive been trying to figure that out help.....? :beg:
-
I dont think jitter should take up an extra button.....
Why not google sethmods and use his hex creator. That way you could have jitter and rapidfire.... Or just use the second output pin for x...
Hard to answer not knowing the way that hex isa set up to run just guessing.
-
If u go with Seth mods I'll pm u all the jitters u need and walk u through how to wire the chip up. Or I can send u a hex file to upload into your pic programmer and and just tell u how to wire everything up. Get back to me if your interested. I got all the latest jitters for all cod titles even MW3.
-
well my fps for the trigger and x are both 30 fps ...but when i use it for the striker i need the momentery button to jitter so i have to press both the trigger and the extra button
-
well my fps for the trigger and x are both 30 fps ...but when i use it for the striker i need the momentery button to jitter so i have to press both the trigger and the extra button
If you have a programmer then just use sethmods.com to create a new hex and use that install guide. Not sure how he works his but I am fairly sure you wont have to tie up an extra button/output pin for it.
If not then if you are in the USA just hit me up or a few others on here and we can send you a chip pre programmed with a better hex.
at this point a better hex would be easier then trying to figure out an answer for your current hex.
-
I've already done all the dirt work for you get ahold of me if you use sethmods I can hook you up with all the jitters that you want
-
I've already done all the dirt work for you get ahold of me if you use sethmods I can hook you up with all the jitters that you want
Thats fine. I was offering to send him pre programmed chip. No dirt required....
-
That's cool I'm just letting him know I've done all my own create a hex with Seth mods and I got some real good stuff. That's what I mean by dirt work doing all the testing and re flashing to make top notch mods.
-
thanks it would be great if you could give me a all programmable hex jitter, rappid fire, and akimbo and any others you can do ..if your able to it would be amazing ..im also willing to pay for the hex
by the way how do I get to sethmods ???
[admin]please do not double post click modify to edit[/admin]
-
sethmods.com
-
Try this sethmods added this for acidmod members
https://www.acidmods.com/forum/index.php/topic,43002.0.html (https://www.acidmods.com/forum/index.php/topic,43002.0.html)
-
thanks umm by the way it dosent say how to wire it up to x and y do you have any pictures how
-
thanks umm by the way it dosent say how to wire it up to x and y do you have any pictures how
Send Sethmods a PM he will help you in anyway needed he really good guy helps out alot of people