Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => Legacy Consoles => PS2 => Topic started by: redryno1221 on December 09, 2007, 07:44:48 PM
-
can someone confirm that this works and is not total B.S..... supposedly it is a 5.1v point but I don't have a multimeter can someone confirm this
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fwww.Multi-Win.org%2Fimage%2Fimages%2Fbwy1197258092b.jpg&hash=b0a92ab8ce056ac18781681721322690d812f28b)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fwww.Multi-Win.org%2Fimage%2Fimages%2Fopt1197258144y.jpg&hash=8650a68da418a08ba75471786e93ec8c06b6b35d)
Download full tut here (http://www.sendspace.com/file/lttm9u)
T3h_0v3rl0rd: Made Pics smaller for you :)
-
resize pics much? and why dont you use the power off the fan? just tie in to it in parallel you get i think its around like 4.5v
-
dude thats an 11 volt point as far as i know...its definitely not 5 cos i'm powering a large fan with lights off it
-
So then I should just connect it to the fans solder points :dntknw:
-
actually that's a 12v point, you can use that, just put the proper ohm resistor inline and you shouldn't have any problems. you could tie into the fan but then you have to worry about changing the resistance, current and voltage values of the fan circuit and can run into problems there.
here's a good pic of the 12v point that was given to me when I started modding my PS2...
https://www.acidmods.com/forum/index.php?topic=3289.msg34670#msg34670 (https://www.acidmods.com/forum/index.php?topic=3289.msg34670#msg34670)
oh and seriously, hit up radio shack and spend the $20 on a digital multi meter, they're worth every penny...
-
yup its fine to use sorry i meant 12v not 11v :drunk: dont solder to the fan connector use the points in the pic just get a proper resistor
-
JR is right about the fan, but i haven't run in to any problems and when it comes to amperage in fans unless you need the torque its not a big deal