Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: viperfan91 on December 12, 2007, 05:08:46 PM
-
can somebody point out some good palces to solder the + & - wires for the LEDs please. And if possible can you draw it on this pic or someother pic of a mobo:
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fwww.llamma.com%2FPSP%2Frepair%2Fimages%2Fcomplete_psp_dissassembly%2Fmotherlift.jpg&hash=0ee1e0c305e089017148860c9aea5b397d6c127f)
-
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fimg77.imageshack.us%2Fimg77%2F3700%2Fpower4soundgz4.jpg&hash=0d52be34b083c2d7285f9a34b0f61b17fc0bc5de)
its a 5 volt point so u well probably need a higher resistor
i have 2 10 ohms in a series
-
or the classic trigger mod one
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fimg265.imageshack.us%2Fimg265%2F9026%2Fpowertoppj9.jpg&hash=8852361964ee8863312afb3322b2b0d5dd95d0c6)
-
can somebody point out some good palces to solder the + & - wires for the LEDs please. And if possible can you draw it on this pic or someother pic of a mobo:
Hey, I'm not trying to be mean or anything like that, but the information you were looking for can be found in the LED tut or with the search button. :tup:
-
i broke the connector for the power board so it doesnt get power for the LEDs anymore. so thats why i need a mother board solder point. Thanx for the responses guys.
-
bridge it run a wire from the 3.6v spot on the mobo by the white clip from the charging cable to the pcb should fix it
-
I am more of visual person. Anyway you could provide some pics. If I can't see it I will be here forever trying to figure it out.