Acidmods

Acid Mods Community Area => Discussion Boards => Beginners Corner => Topic started by: sakobatoneko on January 11, 2008, 05:47:26 PM

Title: clear case help
Post by: sakobatoneko on January 11, 2008, 05:47:26 PM

well i searched the forums for some clear case problems i fixed almost everything but i couldnt find 2 answers that i need. #1 how can i make the slide thing to turn on the psp go back to the middle once i turned it on. #2 where on the power board am i supposed to dremel down?

thanks for your help

Title: Re: clear case help
Post by: 4dP on January 11, 2008, 11:02:10 PM

the powerboard usally does that for you and you don't dremel the powerboard but the piece of plastic near the gears so it does no obstruct it

Title: Re: clear case help
Post by: sakobatoneko on January 11, 2008, 11:39:28 PM

i heard that u have to dremel somthing to make the powerboard not lift up by its self.

Title: Re: clear case help
Post by: psp_nl on January 12, 2008, 04:33:45 AM

Shouldn't the powerboard just fit? :confused:

Title: Re: clear case help
Post by: 4dP on January 12, 2008, 06:31:09 AM

i think your talking about the plastic that holds the wifi antenna just dremel that in most cases you will never need to dremel a powerboard

Title: Re: clear case help
Post by: sakobatoneko on January 12, 2008, 03:25:13 PM

ok, so i just dremel the 3 little stands that hold the antenna. that should fix it right?

Title: Re: clear case help
Post by: *FuFa on January 12, 2008, 03:33:53 PM

Quote from: sakobatoneko on January 12, 2008, 03:25:13 PM

ok, so i just dremel the 3 little stands that hold the antenna. that should fix it right?

You do know that the Powerboard was laying on those stands... and why should it lift itself anyway, you are pressing it down by pressing a button anyway, I don't see why you would ever do that.

Title: Re: clear case help
Post by: sakobatoneko on January 12, 2008, 06:31:29 PM

yes i know that the powerboard sits on top of those 3 stands. When i put the powerboard there it gets stuck to the yellow thing that is attached to the sliding switch. When i turn on the psp the powerboard lifts itself up and then i strougle to turn it off.

Title: Re: clear case help
Post by: 4dP on January 12, 2008, 07:54:53 PM

use hot glue?

Title: Re: clear case help
Post by: budgray19 on January 12, 2008, 08:01:21 PM

show some pics
yea
pics will help

plz its best to see it before u take action

Title: Re: clear case help
Post by: 4dP on January 12, 2008, 08:26:49 PM

hot glue can be taken out easily

Title: Re: clear case help
Post by: sakobatoneko on January 15, 2008, 10:16:07 PM

well i manage to fix it some how thanks for all of your help  :tup: