Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: Dazzerr-- on January 13, 2008, 09:06:25 AM
-
Where do i wire leds when using this plugin http://dl.qj.net/index.php?pg=12&fid=13538&catid=151 (http://dl.qj.net/index.php?pg=12&fid=13538&catid=151)
...?
I will use 0603 blue leds.
-
i would test this with a meter, but it seems like it run from the point on the outside (far left and far right), standard USB ports ground and positive connection are the points on the outside edges
-
what??
-
On what Firmware can i put it on ( i have 3.71 M33)
-
yeah you can put it on that.
But where am i supposed to solder the leds?
-
On the 2 point where the orange colored pins from the Chotto chot cam contact with the psp
-
I tried the plugin but i get an error it says something like the ERROR Connecting USB-GPS ( some numbers )
I put it in module cause i have no nodule folder :help:
-
it would be nice is someone could make a picture showing where to connect the leds coz i am also interested in this plugin
-
On the 2 point where the orange colored pins from the Chotto chot cam contact with the psp
Where is that?
-
Where is that?
on top of the psp doh
it is on the left and the right of the female usb port
-
http://pinouts.ru/Slots/USB_pinout.shtml (http://pinouts.ru/Slots/USB_pinout.shtml)
and also, will this mod work with usb charge? how do i need to wire it to use usb charge?
-
,..................
look at the top of your psp
u'll see the female usb ports
on the LEFT and the RIGHT of the usb ports are holes
these 2 holes are the ones that are used for the plugin, go!cam, chotto shot, mic, etc...
-
ooh, they are the contact pads on the top that you solder to.. i thought you soldered directly to the mini usb female port, on the +5 and ground. so this would work with usb charge... ill meter it before i install them, but it and usb charge should work i think
-
,..................
look at the top of your psp
u'll see the female usb ports
on the LEFT and the RIGHT of the usb ports are holes
these 2 holes are the ones that are used for the plugin, go!cam, chotto shot, mic, etc...
those holes are just for screws!! there is no current or anything passing through them
-
He isnt on about the holes.
Right beside the female USB port there are 2 orange things. you cant miss them. :whoosh:
-
He isnt on about the holes.
Right beside the female USB port there are 2 orange things. you cant miss them. :whoosh:
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fimg232.imageshack.us%2Fimg232%2F8967%2Fdsc00043es9.jpg&hash=bea2ee3c42318fc422c221ba1715fe36d2a97de6)
the ones in red or green squares? how much does it output? 3.6 or 5V?
-
i am pretty sure its the red ones
when you solder your leds there would you mind trying to see if this plugin works with usb charge? it would be greatly appreciated
if you do please email me at
kylesoldname92 (at) gmail (dot) com
and i am pretty sure it is 5v
-
when your psp is in one peice. RIGHT BESIDE the usb of the PSP is 2 orange things!! and i think its 5v...
I tried the plugin but i get an error it says something like the ERROR Connecting USB-GPS ( some numbers )
I put it in module cause i have no nodule folder
What firmware are you on.
i advise you change the name of the plugin to 'lftv_plugin.prx' .
^^this may work just go on the XMB icon 'location free player'
By the way it MUST go in nodule NOT module :)
-
has anyone tested this yet on 3.80 m33?
-
those holes are just for screws!! there is no current or anything passing through them
if i meant the screw holes i'd said that,..
do i look so stupid to think the current will flow thrue the screws ??
-
if i meant the screw holes i'd said that,..
do i look so stupid to think the current will flow thrue the screws ??
i never saw u (joke) :winker:
-
has anyone tested this yet on 3.80 m33?
I dit but i get the same messsage ( and re placed lftv_plugin.prx with the plugin in Flash0) The message syas: Error activating USB GPS (0x8005) thats exact wat is says and no light i put on a led the correct way i tested it with the oran ge holes olmost the usb port so close are they
-
rite, im gonna try the plugin as soon as i get my psp case. odilio can you show a pic of what you have done?
there is no nodule directory for 3.80 M33.
do you have one?
also try renaming it to premo_plugin.prx . this will replace the XMB icon remote play
-
oh so this cant work on 3.80m33? too bad
-
the system maps are hidden in the flash0 ;)
just type the address in the bar ;)
x:/vsh/nodule etc......... (dont know if that line is correct but you just need to type that and x is the drive where the psp is connected so it may be different)
-
i got it. Thanks.
Your way didnt work lol. i had to go on tools/folder options/view and then click show system files.
oh well, your help is appreciated :)
so has anybody succesfully done this yet?.
hopefully my psp case is here tonight and i can try :)
I have just put the plugin on my psp and it says Error activationg usb gps (0x8005)
(i have no leds connected to my PSP though. i just decided to put the plugin in lol
-
rite, im gonna try the plugin as soon as i get my psp case. odilio can you show a pic of what you have done?
there is no nodule directory for 3.80 M33.
do you have one?
also try renaming it to premo_plugin.prx . this will replace the XMB icon remote play
I type in the adress bar X/Flash0/vsh/nodule or module and i came in the map no/module so i named it lftv_plugine cause i dont use location free and a want remote play to work cause i have a ps3 so i dont know if its work on the later firmwarei think we maybe can usa the plugin as a plugine in the seplugins map or en an OE firmware that wat i think
-
did not work for me on 3.80m33-4
i got error
activating usb gps 0x8005
did they change the hex value of the gps/power thing? would we be able to change it with hexedit if we found where it is now?
i do NOT think its my psp, ive tried it on many different plugins..... idk maybe someone else has had success
if not, back to 3.52 for me :)
-
I type in the adress bar X/Flash0/vsh/nodule or module and i came in the map no/module so i named it lftv_plugine cause i dont use location free and a want remote play to work cause i have a ps3 so i dont know if its work on the later firmwarei think we maybe can usa the plugin as a plugine in the seplugins map or en an OE firmware that wat i think
Just go to tools/folder options/view and then click 'show operating system files' (something like that) there is a module but no nodule
I think you might have to solder it in a different location... ??
doubt it but does this give any information?
PIN#
SIGNAL
PIN# SIGNAL
1 +5
2 -DATA
3 +DATA
4 NC
5 GND
Pin 1 and pin 5.