Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: Nemesis on January 20, 2008, 06:03:47 AM

Title: problem cutting umd door
Post by: Nemesis on January 20, 2008, 06:03:47 AM

ive been trying to cut a clear umd door but ive been having trouble. ive been using a dremel and ive cut what sorta looks like a rough circle, but the material the clear door is made from is different from the oem door. when i try to dremel away it basically melts the plastic so it doesnt really look good. i have tried using a knife and running it around the edge but i keep slipping off and its useless

any tips?

Title: Re: problem cutting umd door
Post by: mav3r1ck on January 20, 2008, 07:03:36 AM

i agree, try slowing down the dremel if you can, i usually like to play with plastic around setting 4 on my dremel, but thats not for more delicate work like this, its for ripping things apart lol 

so i would say try using setting 2 or so.

Title: Re: problem cutting umd door
Post by: Nemesis on January 20, 2008, 10:03:53 AM

yep it is variable speed then ok i might try slow down then thanks

Title: Re: problem cutting umd door
Post by: MattZani on January 20, 2008, 10:58:56 AM

you want it just spinning, and ofcourse you finish it off with sandpaper

Title: Re: problem cutting umd door
Post by: DubbleDutch on January 20, 2008, 11:00:45 AM

i cut with low speed and then use sandpaper to make it a perfect circle