Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => Legacy Consoles => PS2 => Topic started by: emac227 on January 20, 2008, 01:10:37 PM

Title: Taking apart a ps2 slim?
Post by: emac227 on January 20, 2008, 01:10:37 PM

could someone post a video on how to completely take apart a ps2 slim like down to the motherboard....?

Title: Re: Taking apart a ps2 slim?
Post by: anthonyta on January 21, 2008, 12:09:13 AM

YOUTUBE

Title: Re: Taking apart a ps2 slim?
Post by: emac227 on January 21, 2008, 07:05:19 PM

i looked but i havent seen one that shows you how to get right down to the motherboard i can take the cover off    could you maybe post one

Title: Re: Taking apart a ps2 slim?
Post by: greendragonslim on January 30, 2008, 02:33:26 PM

i googled "taking ps2 apart" and found it...

Title: Re: Taking apart a ps2 slim?
Post by: whitetop on February 05, 2008, 09:37:05 AM

i cannot find one on the web someone has to make one for ya i cannot find mine and my cam is broke i just have a crappy webcam

Title: Re: Taking apart a ps2 slim?
Post by: P3nnyw1se on February 13, 2008, 05:28:28 PM

Here's what you do, take off all the pads on the bottom of the PS2 to reveal all the screws, then unscrew then.  Pop open the case on the side that has the disc top on it, then carefully pry on the side that shows the Memory card slots and controller ports.  after that, you should see the laser/disc drive and ethernet adapter.  Then slowly lift out the PS2 from the back while NOT pulling on the ethernet adapter!  Then unscrew the screws on the bottom of the PS2 and you've taken apart a PS2 Slim! :tup:

Title: Re: Taking apart a ps2 slim?
Post by: Sil3ntP3nguin on February 14, 2008, 10:01:15 AM

I tried to take apart a slim. but everytime I put it back together, the laser doesnt move.  I dont get why. I read lts of tut's and did it carefully. But i went through 3 slims and the lasers still dont read!