Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: snowboardxbum on January 23, 2008, 11:53:59 AM
-
im confused on how to solder this...
i scrached off the hold button (yellow)
now do i just solder my wire on to the last like pin on the powerboard? (red)
and then solder the blue wire on that hole?
heres a pic of mine
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi44.photobucket.com%2Falbums%2Ff19%2Fsnowboardxbum%2Fohyouknow.jpg&hash=88e69d9a0ccb8b74ebe714756955d46854206d6b)
i want this to work with my trigger mod, so i solder a wire to each of thoes spots, and then solder the negative and postive wires to the led, and it will work?
-
You got it switched, the Hold Pin is - and the one you pointed at with the blue line is +.
-
ok ill remember that, but is that right though, just solder the negative on the hold pin, and the positive on the circle whare i pointed to with blue
-
ok ill remember that, but is that right though, just solder the negative on the hold pin, and the positive on the circle whare i pointed to with blue
scratch off the paint around the cirlce, its much easier to solder but otherwise ur right. and good luck, i was doing this mod yesterday and now my psp is going on ebay as "broken" :cry2:
-
you scratch the stuff of so that you can solder it there encase you need a new switch or something its just easier negative yellow or red, yellow is better positive blue
-
i have a whole nother psp, i wouldnt try it on my good psp, i have "junk" psp with out a lcd screen cage or faceplate or buttons lol so yeah im tryin this :censored: on thur