Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: cjmcleod on February 02, 2008, 02:47:59 PM

Title: Clear Case Mod Issues
Post by: cjmcleod on February 02, 2008, 02:47:59 PM

Hello,

I'm new, but I've been lurking for a while. I recently received a clear full replacement case for my PSP. I've spent about three hours carefully disassembling my unit, and I have (almost) everything out. The one issue I'm having is with the spring that opens the UMD drive up when you press the open switch.

(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fimg151.imageshack.us%2Fimg151%2F3759%2F0202081538fp2.th.jpg&hash=7860b41fac9da9f5b1915e0ddfecd26a3caf6cc3)

Sorry for the horrible image quality, I took it with my phone camera. Anyways, I can't get the spring to come off.

Any ideas?

Title: Re: Clear Case Mod Issues
Post by: *FuFa on February 02, 2008, 03:35:02 PM

Pull it to the left, so it goes over the plastic pin holding it down, the just take it out and put it into your clear case, first the top of that spring, bend to left, and under the pin. Pie.