Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: Soundless on February 04, 2008, 02:42:02 AM
-
Well while i was replacing my psp LDC screen for a new one the black part of the connector just kinda broke off for the short one the long ones still here. So i was wondering if i justed F'ed myself? It must be cause i removed it several times b4. So is it broken?
-
no i have done this at least once and i had enough pressure from the pins to keep the contact so if you don't have enough pressure which i would first try you can solder the wire
-
place the connector into the recepticle then place a small piece of electrical tape to hold it down... this will prevent it from falling out when psp is shaken hard after you lose at loco roco
-
place the connector into the recepticle then place a small piece of electrical tape to hold it down... this will prevent it from falling out when psp is shaken hard after you lose at loco roco
:rofl:
Nah but its not like if the psp is gunna flip out and say "OMG! You just the black tab inside of me... i will self destruct in 5, 4, 3, 2, now! BOOM!"
:laughing:
-
i agree with the last master it won't blow up the same thing happended to me i just put it in like normal P.S. you might have to push it in with a flat head
-
lol it happens to the best of us gl taping that back together :taunt: