Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: Arioch_76 on February 04, 2008, 10:36:52 AM

Title: the beginning of my Mod
Post by: Arioch_76 on February 04, 2008, 10:36:52 AM

Hi , Sorry for my poor english , I'm french......

here is my PSP , I just put 2 Led in the trigger with more  brightness when the trigger work , I made this with 2 transistor and 2 resistor.

In the futur I'm going to put Blue led on the contour of the case .

http://fr.youtube.com/watch?v=wT_I3WKHtU8 (http://fr.youtube.com/watch?v=wT_I3WKHtU8)

(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Farioch76.free.fr%2Fpsp.jpg&hash=abccfaebe30dc3b12b2ddbc37c42483dab674b08)

(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Farioch76.free.fr%2Fgachled%2F8.jpg&hash=6b399614765c6fcd0c2d3b7fb4a503a6c77c4b85)

(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Farioch76.free.fr%2Fgachled%2F9.jpg&hash=be79d3f5bf06062326220a48774dc124a3b6be79)

Bye.

Title: Re: the beginning of my Mod
Post by: tibor28 on February 04, 2008, 10:45:23 AM

nice stuff man, good luck with further mods

Title: Re: the beginning of my Mod
Post by: MattZani on February 04, 2008, 11:32:02 AM

Looks sweet, nice works

Title: Re: the beginning of my Mod
Post by: Arioch_76 on February 04, 2008, 01:42:32 PM

Thanks for your comments , do you want I do a tut's with my poor english ?
I just put here the "schema?" , Perhaps this can to serve you ?
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Farioch76.free.fr%2Fgachled%2Fschema.jpg&hash=9a0c21b740538feeb2713639939935b4ce60a7e7)
this schema is for a fat PSP , I don't know if he's available for a slim
Sorry but it's in French

Bye

Title: Re: the beginning of my Mod
Post by: redryno1221 on February 04, 2008, 02:02:25 PM

nice work!!! How many volts run through to the LEDs wen they're lit up

Title: Re: the beginning of my Mod
Post by: MattZani on February 04, 2008, 02:16:07 PM

"schema?" - Schematic?

So you wired it to the input then? I was thinking a small switch  under the trigger, that would bypass a resistor.

Title: Re: the beginning of my Mod
Post by: Arioch_76 on February 04, 2008, 02:26:04 PM

I use Red SMD 0603 with a 1.85 Volt Here (http://www.dotlight.de/shop/product_info.php/cPath/167_172/products_id/413) , with a 150 Ohm resistor , voltage when Led lit up is 2volt

Title: Re: the beginning of my Mod
Post by: ra1n on February 04, 2008, 02:47:35 PM

Nice thinking with the extra brightness.
Good luck in the future  :victory: