Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: whitetop on February 10, 2008, 02:06:44 AM
-
hi im on about doing the normal trigger mod have i got to use a resister for this i have the 0603 leds that are blue and have look at other threads and some say you need one and some say you dont if i do what kind of resister do i need cos in my tool box i have about 10 diffrent one
-
a resistor is still recommended even with blue so theres no risk of them blowing out and a 10 ohm resistor may do just fine
-
what does this resister look like so i know which one to use
-
there different kinds if you don't know use your multimeter to test the resists in ohms
-
the smallest ones i have are 0.25W metal film
-
the smallest ones i have are 0.25W metal film
what really matters is to get a 10 ohm resistor which you can test with you multimeter if you have one
-
na i dont have one so this means i have to wait
is there anyway i can get them of ebay
-
na i dont have one so this means i have to wait
is there anyway i can get them of ebay
you would really needed to wait since you have blue you can just wire it and when you buy a multimeter remember to get a digital not an analog
-
well i live just down the road from a maplins shop ill go and get one which one is the best one for this
http://www.maplin.co.uk/Search.aspx?criteria=10%20ohm%20resistor%20&source=15&SD=N (http://www.maplin.co.uk/Search.aspx?criteria=10%20ohm%20resistor%20&source=15&SD=N)
-
i have 0 ohm resistors.....
interesting...
-
i would but i dont use paypal and i live in uk thats why i said maplins
-
i have 0 ohm resistors.....
interesting...
you probably put the multimeter to 2k ohms your resistor is higher resistants
-
its probley a 0.45