Acidmods

Acid Mods Community Area => Discussion Boards => Beginners Corner => Topic started by: Jiggyfly on February 11, 2008, 01:10:08 PM

Title: Kynar vs. Magnet wire
Post by: Jiggyfly on February 11, 2008, 01:10:08 PM

I read from a few sites that magnet wire is the best to use for PSP mods and such, and some even said NOT to use kynar at all...but from this site, and some others, it seems that Kynar wire is best....what are the main reasons to choose Kynar over magnet wire???

Title: Re: Kynar vs. Magnet wire
Post by: 4dP on February 11, 2008, 02:15:34 PM

people use kynar because its insulated and less risk of a short

Title: Re: Kynar vs. Magnet wire
Post by: TheMagnolia on February 12, 2008, 05:16:28 AM

Use kynar when available, it's relatively easy to strip (I use my finger nails) and it's also insulated.

Title: Re: Kynar vs. Magnet wire
Post by: dedafmonteur on February 12, 2008, 05:59:38 AM

use kynar.

and just use a lighter to get off the plastic, that's how i do it

Title: Re: Kynar vs. Magnet wire
Post by: Tec_ on February 12, 2008, 06:24:00 AM

or you could just run it through your stripper

Title: Re: Kynar vs. Magnet wire
Post by: Jiggyfly on February 12, 2008, 11:09:48 AM

thanks for all the replies...I was just curious....all these answeres were a big help in my decision of what wire to use...thanks^^

Title: Re: Kynar vs. Magnet wire
Post by: cwn723 on February 21, 2008, 05:29:57 PM

kynar 30 gauge

Title: Re: Kynar vs. Magnet wire
Post by: TheMagnolia on February 25, 2008, 12:47:27 PM

Just remember the following when you're buying your wires: the larger the wire guage, the THINNER the wire is.

This means that a 30 gauge kynar will be thinner then a 5 gauge one.