Acidmods
Acidmods Gaming Area => Console Games => PSP Software & Gaming => Topic started by: rhcp28 on February 12, 2008, 07:08:38 PM
-
I am thinking about putting homebrew on my psp but after doin a lot of research, i have a major question.
Is it possible to create a pandora batery with ONE 3.80 (sony) firmwar fat psp, istead of one regular and one homebrew?
If so how?
Thanks
-
yeh take apart you battery and lift up the 5th pin
-
https://www.acidmods.com/forum/index.php?topic=11971.0#bot (https://www.acidmods.com/forum/index.php?topic=11971.0#bot) << theres the tutorial to make the battery, the mms is easy if you need any more help look in the pandora section.
-
Thanks, but is there any way to completly prevent any explosion?
-
Just don't hold the soldering iron/gun down on the board to long.
I also posted a quick tutorial on the original post here (http://"https://www.acidmods.com/forum/index.php?topic=15312.0").
-
Thanks, but is there any way to completly prevent any explosion?
yeah, ususally if youi dont hold the soldering iron to the board then all should go well, unless you do something wrong (cut wrong pin, hold soldering iron down, etc) but if you do it right it should work
-
just to make sure, does it explode if you hit the 5 and 6?
and i read that if you unhook one of the latches on the bottom, it will cut power and prevent it from blowin up, how would you do that?
-
All you need to worry about is pin 5. Put a piece of paper inbetween the pins if you are worried.
-
it worked! i just have one more question, how do you install kernals and plugins?
-
Go to [url]www.dark-alex.org[/url/ and go down to the kernal section. Pick the one for your firmware and downloaded it. Put the file inside (Called 150K_Installer or something) the GAME folder. Then download the 1.50 Update and put that in the Root of the memory stick (If you go to My Computer, it will show up as Removible Drive X:, X is the letter of the removible drive. Just double click on that icon and put the update in there.) Run the installer and your set. Pluggins are just software. Any software that requires you to put something in the sequrae (Something like that) folder makes you turn it on in Recovery Mode => Pluggins.
-
ok but i have 3.52m33-4 and when i try to run the updater for 3.90m33 it says:
unpacking...done
please wait
and never goes on, how can i fix that?
-
hey this vid may help if u still need help hardmoding a pandora's mabe i just didi a quick search
http://www.youtube.com/watch?v=A38he-NgGOc (http://www.youtube.com/watch?v=A38he-NgGOc)
-
thnx but i did that already, however, i cant upgrade from 3.52m33-4 to 3.90m33 it freezes after it says its done unpacking
-
Try going from 3.52-4 to 3.71-2. Then go to 3.9-2.
-
when i rune the 3.71-2 applicator it says i need 3.52-3 or higher and i have 3.52-3 now.
what do i do?
-
go to 3.52-4
-
it still says it requires 3.52-3 or higher and i have 3.52-4