Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: tibor28 on February 19, 2008, 09:03:35 AM

Title: How did he do that? (video)
Post by: tibor28 on February 19, 2008, 09:03:35 AM
How did the guy do that the leds flash just when there is sound? Normally they stay lightened a bit even when there is no sound. I already tried using the LM386 audio chip but they stay on anyways. Thx
http://youtube.com/watch?v=26RDlxh7yso (http://youtube.com/watch?v=26RDlxh7yso)
Title: Re: How did he do that? (video)
Post by: ryan0 on February 19, 2008, 09:31:08 AM
u might've used too high ohm resistors from the speaker,you do know you can do this mod without an lm386 just hook em str8 up to the speakers and it works much better
Title: Re: How did he do that? (video)
Post by: tibor28 on February 19, 2008, 09:35:55 AM
u might've used too high ohm resistors from the speaker,you do know you can do this mod without an lm386 just hook em str8 up to the speakers and it works much better
yes i know and i already did it but i found it too dim and i didnt like that the leds stayed on all the time so now i want the leds flashing just when there is sound, so i could use a stronger resistor to get that effect?
Title: Re: How did he do that? (video)
Post by: *FuFa on February 19, 2008, 10:20:26 AM
yes i know and i already did it but i found it too dim and i didnt like that the leds stayed on all the time so now i want the leds flashing just when there is sound, so i could use a stronger resistor to get that effect?

Yep should give you the effect you want.
Title: Re: How did he do that? (video)
Post by: ryan0 on February 19, 2008, 12:05:29 PM
oh right yes i know what your talking about,i only did this on the xbox but you should catch my drift,on the lm386 on the top left and top right pins put a small capacitor (about 15uf methinks) between them so this will set a gain or vu,this basically means that the led only turns on when there is sound
Title: Re: How did he do that? (video)
Post by: tibor28 on February 19, 2008, 12:17:25 PM
oh right yes i know what your talking about,i only did this on the xbox but you should catch my drift,on the lm386 on the top left and top right pins put a small capacitor (about 15uf methinks) between them so this will set a gain or vu,this basically means that the led only turns on when there is sound
thx for the tip bro, ill definitely try it
you did something WRONG
what????
Title: Re: How did he do that? (video)
Post by: ryan0 on February 19, 2008, 12:34:18 PM
you did something WRONG
why do u constantly say stupid stuff thats totally irrelevant?
anyways dude you can also use resistors so i recommend tryin it with alot of different cappacitors because they change depending on your leds and the amount of them,use capacitors because they dont flash sharply they kinda pulse instead resistors are kinda crappy to use with it cos u need ridiculous size resistors to set a decent gain (300k ohm+)
Title: Re: How did he do that? (video)
Post by: ProperBritish on February 19, 2008, 01:57:40 PM
Use an LM741CN IC Op Amp with a Capacitor. Idea courtesy of PvP_LostKnight.
Title: Re: How did he do that? (video)
Post by: ryan0 on February 20, 2008, 03:50:06 PM
Use an LM741CN IC Op Amp with a Capacitor. Idea courtesy of PvP_LostKnight.
lol dude i sed that way up there,it wasnt pvp's idea that iea came along way before ppl were puttin op amps in psp's
Title: Re: How did he do that? (video)
Post by: cwn723 on February 20, 2008, 08:39:03 PM
use higher quality amp... nuf said :yess:
Title: Re: How did he do that? (video)
Post by: ryan0 on February 21, 2008, 04:38:58 AM
use higher quality amp... nuf said :yess:
lm386 is the best out there for its purpose,it also uses less power tan the rest but still does a better job,no he doesnt need a higher quality one he just needs to set up his gain right..
did you get this working tibor?
SimplePortal 2.3.5 © 2008-2012, SimplePortal