Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Slim (2000) => Topic started by: salmonson on February 23, 2008, 03:04:08 PM
-
B4 any1 says anything yes i have searched around the forums b4 making this topic.
First of all i have a PSP slim (even if that matters)
I'm trying to figure out what equipment i need to get L&R trigger LED, D-Pad LED, XO/\[]
button LED,and LED in back of PSP with jewel.
I have a PSP battery with 3.6v and 1200 mAh.
Does any1 know what equipment i need to do this? the type of LED I'm using is tri-colored.
-
um idk i have only ever done led mod with 0603 leds i sugest you do the same, lol. Nah if someone gives you the thumbs up give it a try. you will probaly need 30 guage wire and a soldering iron :tup:
-
yeah on this website evey1 says use 0603 led's so i will do tha same once when i learn what equipment i will need to do it. im so confused. :dntknw:
-
you will need a phillips head size 0 screwdriver, soldering iron(20-30 watts is good for a beginner), solder, 30 awg wire(kynar is good) and i think thats abt it because u already have leds. just find some solder points used by other ppl and you should be good to go
-
For the led mod on triggers, dpad, []OX/\
30-gauge Kynar wire (best to have different colors)
2x 0603 LED’s
1x 191k-ohm Resistor
1x 30k-ohn Resistor
1x LM386 Audio Amplifier IC
Hot glue gun (optional)
Soldering Iron (nothing more then 15 Watt)
Solder (.015 size works best)
Flux
Drill
3/16 bit
Jewel:
kynar wire
1-4 0603 led
Jewel
Dremel Tool to cut the circle out
-
alright thx guys. does these equipment work while usind hold button mod?
-
Yes, it works. Just talk to a mod or something, they'll hopefully help you out.