Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP Phat (1000) => PSP's => PSP Duel Nub. => Topic started by: Polansky on February 23, 2008, 05:05:11 PM
-
Hey everyone im interested in making a dual nub psp. The only thing i need to know is where to solder the razor board to the psp's PCB. The tuts show the 5 points on the razor, but the images showing the points on the PCB are broken and i only know the points for O, X, [ ], and /\ but not for the ground point ( X shape circle thing that goes between the other 4 points). If someone can post a pic with the PCB ground point to the point on the razor. Thx 4 the help guys.
-
https://www.acidmods.com/forum/index.php?topic=12678.0 (https://www.acidmods.com/forum/index.php?topic=12678.0)
this tut still has all the pictures you need including the /\ and ground
-
Thx but ive seen this. The 1st pic is broken and is the ground wire the top left 1 in the [ ] and X pic?
-
it shows a picture with all of them soldered, the one that is not next to the black button contacts is your ground
EDIT: here's the a2d tut https://www.acidmods.com/forum/index.php?topic=13414.0 (https://www.acidmods.com/forum/index.php?topic=13414.0) even though it's for the a2d, the soldering points on the board are the same.
-
The zoomed in pcb was what i needed. Just a recap: The blue/whie wire is for ground. And i can solder it on the bare pcb in the showen area without puttin it through a hole? O and do i need to scrach some trace off the bare pcb or do i just solder without scrathing or anything? Thx a bunch.
-
you don't need to put it through a hole, you will need scratch a line exactly like in Edhel's tutorial and solder the wire there.
-
Thx alot guys, that's all i need. Ill get back to you if i run into some problems.