Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: cwn723 on February 27, 2008, 05:45:04 PM

Title: need help on sound mod.
Post by: cwn723 on February 27, 2008, 05:45:04 PM
hello, i am doing the sound mod, and after i solder on the 5v to the mobo, when i am trying to put the mobo back on, the wire always breaks. it isnt breaking at the solder point, but on the insulated part. i am using radioshack 30 gauge wire, ive even tried hot gluing it, but it doesnt work.
Title: Re: need help on sound mod.
Post by: TW1NKY on February 27, 2008, 06:20:36 PM
I have not had any problems with radioshack 30 gauge wire. From my experiances, it is pretty strong.

Are you bending the wire a lot when you strip it or solder it? That would weaken the wire.
Title: Re: need help on sound mod.
Post by: SYSTEM aka (Cyberpyrot) on February 27, 2008, 06:25:10 PM
you have a bad batch I have bought many spools from radioshack and somtimes I get a batch that breaks often.
Title: Re: need help on sound mod.
Post by: cwn723 on February 27, 2008, 06:30:28 PM
ok thanks, ill just go out and buy some new wire.

also, is there a ground point and 5v point on the daughter board so i can use those instead of the ones on the mobo for less wires?
SimplePortal 2.3.5 © 2008-2012, SimplePortal