Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: psphacksntips on February 29, 2008, 05:40:03 PM
-
Why does it do that and i have white 0603
Can it be that i put the wires on the wrong spot?
Do i need a 10 ohm resistor?
Heres the picture:
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi271.photobucket.com%2Falbums%2Fjj135%2Fpsphacksntips%2FP2290001.jpg&hash=3b69691497826e48be14c274d41df0fa0d61e13e)
This is where i put the wires......
directly on the powerboard
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi271.photobucket.com%2Falbums%2Fjj135%2Fpsphacksntips%2FP2290003.jpg&hash=ca5c3697dcd49390d5cca4e6260101c495861bcb)
-
you put them in an always on spot... try the hold mod, or a different spot.
-
thanx for the help ill try the hold mod but how do also do the sound sensitive led mod, where do i connect and solder the wires??
-
Connect it to wifi, its easier i think. Put use the 3rd pin as ground, and find a positive spot.
-
Yea connect to wifi, Much easier, just find positive spot should work fine. Just put the thing in the right spot.
-
wait is that for the wifi cause i dont want the wifi led mod i want the hold or sound sensitive led mod
-
im not sure weather its just me but i carnt see where u wired it in that last pic. This happened to my mates psp, but i cannot remeber how he fixed it :cry2:
-
if there on wile the psp is off, its cause there is a short. the psp is still hot even will it is off, so if your bare wire makes contact with the frame, the leds can turn on, or if the wrong wire touches the frame wile they are on they can shut off