Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: IndyChav on March 01, 2008, 10:20:52 AM
-
Ok I want to wire the WIFI switch to the hold switch as a sort of security type deal where you have to unhold both switches for the PSP to work. Will this work?
I've already bridged my wifi so its always on as I was going to wire my LEDs to it then decided to wire to face buttons regardless help? Just wanted to clarify before I attempt
Cheers,
IndyChav
-
yes it will work just wire the bottom and middle pin or top and middle pin depending on which way you want hold to be to the actual hold button positions so as the hold on is down position if you wanted it like that you would wire it like this
wifi bottom point to hold bottom point
wifi middle point to hold top point
and then it will create the circuit even if the hold switch isn't actually on itself putting the psp in hold meaning you have to unhold both
-
i argree with Fat30YGG it would work but to bad i cant do this on my modding psp cas i already scratched the hold swicth for leds :cry2:. btw can you wire the wifi swicth so it can be used as the hold if you have modded ur hold switch? :dntknw:
-
yeah just wire it to the where its scratched and then to the other hold point and it should still work
-
sweet
thx