Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: tibor28 on March 01, 2008, 01:14:01 PM
-
Guys im in a hurry and i want to put a small mic that i took out of a broken phone into the psp headphone remote control. I found out the pinouts look here:
Pin Internal wire Function
1 Brown wire Microphone input (decouple with a capacitor against audio ground)
2 Blue wire Digital ground
3 Orange wire TXD
4 Green wire Sense? Grounding this pin wakes PSP from standby.
5 Yellow wire +2.5V
6 Grey wire RXD
Tip Pink wire Left audio
Ring Red wire Right audio
Sleeve Black wire Audio ground
Now from what i understand i need to connect the microphone to the brown wire and audio ground (black wire) but i cannot find any black wire in the remote :confused: any idea how to connect the mic?
fast plz
-
if I understand right , you plan to put a microphone in/on the remote
this: http://www.walmart.com/catalog/product.do?product_id=3884948 (http://www.walmart.com/catalog/product.do?product_id=3884948)
if so just wire it to the 3.5 jack spots I believe it is /-\ left
\_/
|_| right
|_| mic
| |
| | ground
although mic and right might be reversed
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi168.photobucket.com%2Falbums%2Fu200%2FCHarper1980%2Fremote.jpg&hash=b59f155d70dd076771ff91ce8c2d5f652bae383c)
the colors you got are from an old remote I have had three and they were all different boards and different wiring colors
the mic can be grounded with the audio or digital ground, I would think the digital would have less static/noise
-
dude. this would be killer awesome if you made a tut with pictures to do this. :#1:
-
if you don't take pics kittens everywhere will die
-
if I understand right , you plan to put a microphone in/on the remote
this: http://www.walmart.com/catalog/product.do?product_id=3884948 (http://www.walmart.com/catalog/product.do?product_id=3884948)
if so just wire it to the 3.5 jack spots I believe it is /-\ left
\_/
|_| right
|_| mic
| |
| | ground
although mic and right might be reversed
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi168.photobucket.com%2Falbums%2Fu200%2FCHarper1980%2Fremote.jpg&hash=b59f155d70dd076771ff91ce8c2d5f652bae383c)
the colors you got are from an old remote I have had three and they were all different boards and different wiring colors
the mic can be grounded with the audio or digital ground, I would think the digital would have less static/noise
wow thx man, and do you have any idea where the + and - side on the mic goes? Is it - to ground and + to mic input?
edit. ALL RIGHT, heres the good news, i got it to worka nd was able to record my voice with the mic!!! But the bad news is that it was really really weak and you could hear a lot of fuss and feedback. I wired it up to the Ground on the audio jack and other side to the brown mic input wire. Any ideas how to get it louder??
-
you might test it on audio ground and digital ground. it is possible that the mic requires more power than supplied by the remote, but I have a cell phone mic in my psp and it works well. the only alternative would be a preamp, and with you only getting 2.5v from the remote I don't think it would work well enough