Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: RoBot1ks on March 05, 2008, 04:14:45 PM
-
You know how if you are going to do the internal chotto...and you have to connect the wires directly to the inside of the psp? Well I was thinking of some kind of solution to be able to switch over from the USB port to the CHOTTO...and maybe the GPS... :w00t:
And I came up with 3 concepts, of which the third is my favorite. If I could just figure out how to custom make the switch compartment and the other stuff..
I am planning on making a prototype once I get a chotto. Then I will hook up the wires for the usb and chotto to the switch and see if it works...you'll see :tup:
Kind of came up with a name for it, but any suggestions will be appreciated!!
Quick Switch Mod for the PSP
http://i259.photobucket.com/albums/hh301/RoBot1ks/Dsc00373.jpg (http://i259.photobucket.com/albums/hh301/RoBot1ks/Dsc00373.jpg)
-
good luck im not sure if it will work but give it a go :tup:
-
good luck im not sure if it will work but give it a go :tup:
I hope it does
I just have to figure out what i should cut the pieces out of :dntknw:
-
good luck with that, just wondering one thing. if you have the chotto mod, will the usb port still function normaly?
-
good luck with that, just wondering one thing. if you have the chotto mod, will the usb port still function normaly?
If you do it right..yes
if you just solder everything to the usb port without a switch, no. Your PC will start detecting the chotto shot. Hmm... I wonder if there are drivers for it.
-
If you do it right..yes
if you just solder everything to the usb port without a switch, no. Your PC will start detecting the chotto shot. Hmm... I wonder if there are drivers for it.
there are, if you connect your psp to ur pc and click the camera icon on your psp it tries to install drivers, but because of the psp error message it never has time to finish
-
there are, if you connect your psp to ur pc and click the camera icon on your psp it tries to install drivers, but because of the psp error message it never has time to finish
Simply connecting the usb cable is enough to make your PC go ape:censored:.
-
I am glad I came up with this mod the way I did: Only one set of connectors are running through the mobo at one time, so when you plug your psp up to the computer(slide the switch to usb) it can't detect the gps, or anything since they're not a complete circuit
-
so let me get this right you took a go cam and a sat nav and wired them internally
which adds weight and makes it less portable, i could understand if you wired the camera internally but why wire the sat nav it is heffing big and heavy you just made your psp a ps, they were made interchangeable for a reason
-
so let me get this right you took a go cam and a sat nav and wired them internally
which adds weight and makes it less portable, i could understand if you wired the camera internally but why wire the sat nav it is heffing big and heavy you just made your psp a ps, they were made interchangeable for a reason
No, I haven't done it yet...But the gps was just a concept. You can use anything you want with the switch (as long as you wire it correctly)
-
You can't make the GPS internal, simply because you won't recieve anything, the reciever must be outside to recieve any signal at all.
-
You can't make the GPS internal, simply because you won't recieve anything, the reciever must be outside to recieve any signal at all.
Yeah that's where I thought I would have some problems. I don't think I want to use the gps..maybe I will use something else
-
i read the internal chotto shot tut and it doesnt show you which point is connected to which usb pins in the mother board. Any one know?
can i still use the usb charging mod if i have the chotto shot in there?
-
i read the internal chotto shot tut and it doesnt show you which point is connected to which usb pins in the mother board. Any one know?
can i still use the usb charging mod if i have the chotto shot in there?
Good question..you would just have to take a look at which pins go where...
If you still want to do the usb charging mod, I think this switch would help you out...you just wouldn't be able to use the chotto while in usb mode(simply because the switch I came up with is only running one thing at a time.
If you were charging it, you would have to slide the switch to usb.
-
what switch?
-
what switch?
The switch of which this topic was made for :victory:
-
i dont know how to work with switches. :(
-
i dont know how to work with switches. :(
Yeah I think it would be aggravating trying to get all of the parts together and everything
-
you know i had a similar idea, posted about it awhile back but i never got sround to testing it, i was gonna try to use a cameras mode switch, if that helps any.
-
Simply connecting the usb cable is enough to make your PC go ape:censored:.
thats why u use a mem card reader
-
you know i had a similar idea, posted about it awhile back but i never got sround to testing it, i was gonna try to use a cameras mode switch, if that helps any.
From a digital camera? If I had a spare one laying around, I would take a look at it. But I know what you are talking about. Maybe a cheap one with a slide switch for 1.Viewing the pictures...2.Taking pictures....3.Video....or something like that
-
i have a rotating switch from a busted kodak, the contact points only have 3 connectors, so i dunno if it would be any good for usb switching :/
-
i have a rotating switch from a busted kodak, the contact points only have 3 connectors, so i dunno if it would be any good for usb switching :/
Maybe you could add some more pins on it....
-
i have a rotating switch from a busted kodak, the contact points only have 3 connectors, so i dunno if it would be any good for usb switching :/
That's a potentiometer, not a switch.
Also slap a god damn switch to the DATA +, how could you make such a big drama around something that simple.