Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP Phat (1000) => PSP's => PSP Duel Nub. => Topic started by: sakobatoneko on March 06, 2008, 04:53:20 PM
-
well i just came back from buying the etching kit from radioshack but i dont know which bottle to use in step 3 and 4
Step Three: ETCH
*take the ETCH solution and put it into a dish (only half of the bottle)
*put the PCB in facedown with the design into the solution
*let it stay there for 15-20 min
*take it out
*pour water (take a empty gallon of milk and put water in it) and slowly pour water over the PCB so that the chemical will get off
Step Four: Solution
*take the other bottle labelled SOLUTION and put it into another dish (only put alittle bit) and put the pcb in face down
*turn it around after a minute and take a sponge and scrub at the black ink and it should come off revealing copper underneath
*pour water over the pcb as like before with the ETCH and you're done!
i got these 2 bottles from radio shack pc kit
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fimg404.imageshack.us%2Fimg404%2F224%2Fdscf2480pl1.jpg&hash=438f3e795da55b86dddd07ea38fab148e664b46e)
resist ink solvent
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fimg530.imageshack.us%2Fimg530%2F7735%2Fdscf2483ds2.jpg&hash=ba902d9087942c1c2f7fb2d8636f2da715114cec)
pcb etchant
which one do i use for step 3 and which one do i use for step 4?
one more question do i really have to print the razors witha laser printer?
-
cwn723 has clarified which bottle is which and now my question is Can i print the paper with a normal printer and not laser printer?
-
U need laserprinter, PCB etchant take all nopainted cooper off ;) sry my english is pure :)
-
thanks... now i need to know where i can by more of resist ink solvent(stripping solution)
-
U need alcohol based marker ;) thats all. It worx same way.
-
how do i use that? how will that take off the ink?
-
oh sorry , when U need take off ink from PCB use alcohol ( aftershave or something like this ) or sand paper.
-
oh sorry , when U need take off ink from PCB use alcohol ( aftershave or something like this ) or sand paper.
my mate said isopropyol is gud (i think i spelt it wrong :laughing:)
-
You can also just use a razor blade to scrape the paint off :)
also...
where do you buy isopropyol? I need some of that to clean my laser engraver...
-
does the etchant ever stop working? or will i be able to reuse it forever
-
you should be able to use it forever, but i would recommend it. use it max of 2-3 times then get a new bottle
-
i've used mines over 3 times for sure now. but whats wrong with using it so many times?