Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: bsbuk on March 09, 2008, 11:18:57 AM
-
hi guys, just wondering what is the second smallest leds after 0603 leds as i find them to hard to solder to, and if i buy a different kind of led, will a 10ohm resistor be ok for it?
thankyou
-
yes
-
get 0805, they are bigger and VERY easy to solder and you can still use them perfectly (i even used them for the led swap mod)
-
0805 and 15 ohm should work ok
-
thanks for they replys guys, ive ordered some 0805 leds today, and another question lol, i tried soldering some 0603 leds today following lordnicos tutorial, and after soldering them to a wire, i jus put the wires into the psp battery, and they just burn out, tried with 2 and they just burn out?
thanks for your help :)
-
thanks for they replys guys, ive ordered some 0805 leds today, and another question lol, i tried soldering some 0603 leds today following lordnicos tutorial, and after soldering them to a wire, i jus put the wires into the psp battery, and they just burn out, tried with 2 and they just burn out?
thanks for your help :)
the battery has too high voltage for them! You have to chceck the maximum voltage you can apply to your leds otherwise they will immediately burn out
-
dude the battery has got to much voltage and also packs 1AMP thro them!!!, i mean leds are only surposed to run with 20mah let alone 1AMP!!! of course they are gona burn themself's silly unless you add a resistor :taunt:
-
once i connect a 0603 to a 9v lol and the LED smoked and smelled really bad.
-
once i connect a 0603 to a 9v lol and the LED smoked and smelled really bad.
lol, that must have been one of ur brighter ideas :taunt: , I attached a 0603 to a power surply that i didn't know was set one 16v and 2Amps!!! it didn't even flash just sorta heated up and smoked :cry2:
-
once i connect a 0603 to a 9v lol and the LED smoked and smelled really bad.
doesnt sound good.
-
One day I was just playing with a couple different LEDs I had. I don't remember what I connected one of them to but it glowed orange, different than it's normal color, and made a kind of whining sound before it exploded..... Good thing I had safety glasses on, a small piece hit them and melted on. :boxed:
-
One day I was just playing with a couple different LEDs I had. I don't remember what I connected one of them to but it glowed orange, different than it's normal color, and made a kind of whining sound before it exploded..... Good thing I had safety glasses on, a small piece hit them and melted on. :boxed:
wow lucky man, once i had a 10mm super strong led and accidentaly connected it to a BIT too strong power source (a big rechargable battery that i took out of huge RC car :laughing:) and the led caught fire inside! Lucklily it didnt explode