Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: buickgnx on March 15, 2008, 06:25:32 AM
-
ok so last night i was instaling cxmb for 3.90. so i thought what if i put the flash 0 back to normal becouse it didn't look right. so it came up with the drive is full. so i thought ok it's good. now when i went to turn it on the screen would stay black and not even go into recovery. nothings working evan a pandor btery. when i go to 1.50 the blue screen pops up that tells you to hit O so i do and it just comes back to the screen. ples help. :cry2: :beg:
-
I'm pretty sure what you did is just added the files back instead of overwriting them, if you have a hardmodded pandora batt and mem stick with the filets on it you should be able to reinstall the CFW
-
i've tried the 1 that goes to 3.80 m33 and it turns off after the format 1. when i try the nad it can't read the file even with a new nad.
-
sounds like there is problems with your flash 1, if you cant format your flash 1 then your may be out of luck, im not going to suggest this but there is the phisical psp unbricker on pandora.
this should be in software section
-
it can't open the nad
-
what do you mean by the nad.
do you mean that when you try to format the psp it says it cant access flash 0
-
wrong section, so you cant boot up in recovery?
-
no it stays black
-
does pandora work? if not why not, what errors do you get? does it not format the flash?
-
lets just say it is becouse i exchanged it at bestbuy for a slim lol :tup: