Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: krazieaznboi on March 23, 2008, 11:18:54 PM

Title: Which resistor do I use?
Post by: krazieaznboi on March 23, 2008, 11:18:54 PM

If I plan to use 6 LEDs do i still use 10ohm?

Title: Re: Which resistor do I use?
Post by: tanoz on March 24, 2008, 05:13:19 AM

10ohms should be fine, its only a small resistance. If you find ur leds dim tho just solder direct witout the added resistor.

Title: Re: Which resistor do I use?
Post by: krazieaznboi on March 24, 2008, 10:03:29 PM

okay, thanks.

btw what is the maximum amount of LEDs i can have in my psp?

Title: Re: Which resistor do I use?
Post by: GhoSt on March 24, 2008, 10:12:43 PM

depending on how you wire them if in paralell 10Ohms should be fine. Note i dont think the psp can handle 6 Leds on just the power board. i think four may even be pushing it. But say 4 on the power, 2 on wifi, 4 on speakers so i guess about 10 leds. But mabe more idk.

Title: Re: Which resistor do I use?
Post by: krazieaznboi on March 24, 2008, 11:11:36 PM

how do u hook up LEDs to the wifi?

Title: Re: Which resistor do I use?
Post by: tanoz on March 24, 2008, 11:54:12 PM

4 leds will be more than fine. My psp has 8 and i use a resistor and its still bright.
Another spot tho if u want more is two silver contacts below the speakers. it outputs 5v

Title: Re: Which resistor do I use?
Post by: krazieaznboi on March 25, 2008, 02:31:44 AM

so you have 8 LEDs connected to your powerboard or do you have 8 LEDs in total?

Title: Re: Which resistor do I use?
Post by: tanoz on March 25, 2008, 02:44:07 AM

yeh all running off that one powerboard spot.

Title: Re: Which resistor do I use?
Post by: krazieaznboi on March 25, 2008, 01:11:07 PM

and your still using a 10ohm resistor?