Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: bevyii on April 02, 2008, 09:11:58 AM
-
I used to be able to find that topic.. And yes.. by using the search button. the thread seemed to be lost
I cant find the tut for Phat psp on hold switch mod.. it used to be in the tut section..
link me pls? i cant find it for days of searching man...
-
aack.. bro it doesnt work..
the one im lookign for specifically is the one here.. its like its been moved somewhere
-
Parts needed:
Leds
Powerboard
Kynar wire
For Standard Trigger mod:
Step 1: you need to scratch the trace to the hold button (this is to disable the hold function), see pic below.
Step 2: Now you need to solder some kynar wire into the positive and negative points as shown in the picture.
Step3 : Solder your leds onto the positive and negative wire you just soldered.
Thanks to [HOP] for the pic
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fimg169.imageshack.us%2Fimg169%2F8253%2Fholdledsxa0.jpg&hash=f3668aa60424b2fb17c812a34e2cb7cb8baa26ab)
You now have hold activated leds :D
For Sound reactive leds to disable/enable leds
Method 1
Step1: Scratch the trace to the hold button (this is to disable the hold button), see pic below.
Step 2: Solder some kynar wire into the positive and negative points as shown below ( you will use this as your + 5.0v point and - instead of the point on the mobo as show in the sound reactive tutorial)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fimg169.imageshack.us%2Fimg169%2F8253%2Fholdledsxa0.jpg&hash=f3668aa60424b2fb17c812a34e2cb7cb8baa26ab)
You're done :D
Method 2
Step1: Scratch the trace to the hold button (this is to disable the hold button function) see pic below.
Step 2. Solder the - point from the mobo into the First leg of the hold button and then solder another piece of wire into the second leg.
Step 3: Now solder the wire that is soldered to the second leg into the lm386 as usual.
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fimg148.imageshack.us%2Fimg148%2F6844%2Fholdledxt7.jpg&hash=4fa69116d3f3a5b2e083d2dc655f529ffa087894)
MEthod 3:
Use the negative from the hold switch, and use the +5.0v from the mobo.
To use the hold switch for other things:
Step 1: scratch the hold trace as shwon (this is to disable the hold function) see pic below.
Step 2: Solder One of the wires in the circuit into the first leg of the hold switch, and solder another piece of wire into the second leg.
Step 3: Solder the wire that is soldered into the second leg of the hold button into wherever it would normally go.
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fimg148.imageshack.us%2Fimg148%2F6844%2Fholdledxt7.jpg&hash=4fa69116d3f3a5b2e083d2dc655f529ffa087894)
Please note in this tutorial the red circled part in the picture is the second leg.
-
sick man. Thanks I was looking too.