Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: batl_M on April 11, 2008, 08:50:27 AM
-
Ok so yesterday i finished puting on the clear cover for my psp.When i was removing the UMD door only the left side came out easily so that left the right side attached to the psp and the left sticking out.I think this might have warped the UMD drive a little bit but it looks fine.
Anyway to get to the problem ,when the psp reads a UMD it makes lots of wierd noises.
I have checked to make sure that its not the psp that makes the noises because i tested it by holding down the safety thing in side the UMD drive and it started reading (nothing) but no noise.
here is a video:
http://ie.youtube.com/watch?v=6FUzblcl4AQ (http://ie.youtube.com/watch?v=6FUzblcl4AQ).
-
the clear cases sometimes have to be cut so they dont inter fere with the gears at the bottom or do u have any wires by them i had that prob i just moved my wires.
-
where abouts , i dont really see anything in the way.
do you have a pic?no?
-
sounds just like mine did when i fitted my clear case.the gears for the umd drive interfere with the clear case as it isn't OEM. this pic shows what needs to be cut out
https://www.acidmods.com/forum/gallery/2225_05_08_07_1_43_47.jpg (https://www.acidmods.com/forum/gallery/2225_05_08_07_1_43_47.jpg)
(borrowed from the kenshiffix tut)
or the whole tut can be found here-read it an follow it word for word like i did an you can't go wrong
https://www.acidmods.com/forum/index.php?topic=13466.0 (https://www.acidmods.com/forum/index.php?topic=13466.0)
*FuFa - Fixed urls.
-
As the tut says, the pictured one is overly dremeled, but I always figured better to be safe than sorry and removed more plastic than needed... Kinda weird seeing one of my PSPs in the clear case again, since I think I scraped that one for parts a while back...