Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: 5and5 on April 14, 2008, 03:15:32 PM
-
I didn't really like my old psp so a changed it and made it better.
http://www.youtube.com/watch?v=szJlqL4tzBw (http://www.youtube.com/watch?v=szJlqL4tzBw)
If you couldn't tell wi-fi switch turns on the RBG leds and I put the power switch it the back because my brother keeps take my psp.
Now tell me if you like my psp or not?
-
hehe very innovative, u had like 12 leds in there :P
you must tell me what that screen saver thingy is, i like it :D
nice psp dude :victory:
but i give it a 4/5 as like a 98 so its good but not perfect
and those rbg leds, were u get em?
-
how did u make the rgb leds to fade between colors? chip? if it had a transparent front faceplate i would give 5/5 but i dont like mix of different colored faceplate and different colored backplate, so 4/5, still, great job dude!!!
-
You get the RBG leds at http://shop.sickmods.net/shop/LEDs/Multi-Color/ (http://shop.sickmods.net/shop/LEDs/Multi-Color/) and I justed used a 68ohm resister no chip.
-
what kind of chip?
-
what kind of chip?
you can pick up led changing psp modification chips there has been several topics on them :tup:
-
you can pick up led changing psp modification chips there has been several topics on them :tup:
well i modded my mouse the otha day and i found 3mm rainbow leds they change by them selfs?
-
yer but they a bit big 4 da psp, nd im pretty sure there are no 0603 rainbow leds.
-
yer but they a bit big 4 da psp, nd im pretty sure there are no 0603 rainbow leds.
ermmmm someone just did a leds around the psp using 3mm including triggers so it is possiable
-
ermmmm someone just did a leds around the psp using 3mm including triggers so it is possiable
yea of course its posible but its takes up way more space limiting the amount of areas you can place them in teh psp. Please link me to the guy hu did it cas i wana find out wat size resistor he used and where he wired it, cas my mate tryed it and fryed his powerboard :hifive: .
-
yea of course its posible but its takes up way more space limiting the amount of areas you can place them in teh psp. Please link me to the guy hu did it cas i wana find out wat size resistor he used and where he wired it, cas my mate tryed it and fryed his powerboard :hifive: .
[url]https://www.acidmods.com/forum/index.php?topic=17509.0[url]
he used 3mm for trigers and 5mm in otha spots
-
yes i did and now i have 5 mm in my triggers its a verry tight fit i had to file the led on both sides the boar out triggers almost all the way from top to bottom to squeeze them in there i have a resistor under the power board and d pad for triggers and one in the umd drive just conected to led. the red ones hog up all the energy so i just put 10 ohm resistors on the red ones in triggers and umd and no resistor on blue ones they are all wired to lm 386 on a 5 volt point the lm386 is between umd drive and lcd in that little place to the right of the gears and wires are run where the right speaker wire goes