Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: sugadaddy on April 21, 2008, 02:24:44 PM

Title: i have a problem
Post by: sugadaddy on April 21, 2008, 02:24:44 PM

ok heres mi problema. while taking off my LCD on my phat, i popped the fuse on the motherboard. when i press it and my charger is plugged in, i get an orange LED, but no green LED when i try turn it on. no booting whatsoever either. i tried following the instructions in this youtube video, http://www.youtube.com/watch?v=mYRnaImG28E, and when i press the little tab i get the green LED, still no booting.

any help? :help:

Title: Re: i have a problem
Post by: GhoSt on April 21, 2008, 04:21:36 PM

idk mabe bridge the fuse u poped but dont take my word on this cas im not sure.

Title: Re: i have a problem
Post by: Ch4rL13 on April 21, 2008, 04:44:03 PM

??? how can u blow a fuse while removing teh screen?
post some pics of you problem
and without posting pics i would just say to try and bridge the fuse but that might not be the best idea, and if that dont work, u got to buy a new mobo.

Title: Re: i have a problem
Post by: sugadaddy on April 21, 2008, 06:25:08 PM

im a noob when it comes to hardware stuff, what does bridging the fuse and mobo mean. ur probably laughing right now but u gotta learn somehow lol

p.s. u dont wanna know how i popped the fuse, but i can assure u it wont happen again :rofl:

Title: Re: i have a problem
Post by: Ch4rL13 on April 21, 2008, 06:35:04 PM

haha i am laughing :rofl:
ok first of all if you dont know what mobo stands for you shouldnt be opening your psp
well a mobo is the motherboard of the psp
and bridging the fuse is when u connect the + and - sides together, so  i suppose you could just put a blob of solder on the fuse so the + and - sides are connecting
although dont ever bridge something while the electronics are on, just so you know because it can make a rly big spark and even start a fire, so ive heard.
hope that fixes the problem :D

Title: Re: i have a problem
Post by: sugadaddy on May 14, 2008, 01:40:24 PM

well before i bridge the plug(or the fuse, whatever its called), here are some pics to show my problem.

(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi257.photobucket.com%2Falbums%2Fhh240%2Fsugadaddy7661%2FPhoto-0079.jpg&hash=666d27a2ecc7c4f91200213eb440521e833c733c)


(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi257.photobucket.com%2Falbums%2Fhh240%2Fsugadaddy7661%2FPhoto-0082.jpg&hash=4ff96289093dbbeb3444424faddc49580b803c82)


(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi257.photobucket.com%2Falbums%2Fhh240%2Fsugadaddy7661%2FPhoto-0079-1.jpg&hash=a6836c30c6b5a81a18e7f97fc520bb19f27f9efa)

Title: Re: i have a problem
Post by: DubbleDutch on May 14, 2008, 02:46:05 PM

a customer had thesame problem

remove the white part from the wire (what used to be on the mobo)

then solder 2 wires from each point on the mobo to the wire from the ac plug

Title: Re: i have a problem
Post by: sugadaddy on May 14, 2008, 03:50:15 PM

remove the whole white plug or just the top half? im a little confused  :dntknw: