Acidmods

Acid Mods Community Area => Discussion Boards => Beginners Corner => Topic started by: sakobatoneko on May 08, 2008, 08:29:42 PM

Title: led swap
Post by: sakobatoneko on May 08, 2008, 08:29:42 PM

how can i do it to the slim? i tried to but the power led is always on even thou the psp slim is off. can someone tell me how to do it or draw me a diagram showing how to solder the leds the the 3 points.

Title: Re: led swap
Post by: 4dP on May 16, 2008, 08:01:01 AM

try soldering the leds to short wires then to power boards and you accidentally soldered the power or the charge led neg- on the ground

look at this diagram for help

(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi168.photobucket.com%2Falbums%2Fu171%2Fthe4dpatrick%2FAcidmodsPSPSlimPowerboardinfo.jpg&hash=e86fe277abf53755e17ec8a41684ca71ed38882d)

Title: Re: led swap
Post by: TheMagnolia on May 19, 2008, 01:20:59 AM

I had the same problems with soldering leds for my power light on my ds lite.  I used 0630 LEDs and kynar to solder it into place then carefully glued the LED to the middle, it worked.

I had anotherfriend attempt the same thing but he used a larger sized LED, both options work.

Title: Re: led swap
Post by: sakobatoneko on May 19, 2008, 08:37:19 PM

cool thanks i got it working  :tup:

Title: Re: led swap
Post by: TheMagnolia on May 20, 2008, 02:26:12 AM

Which technique did you use?

Title: Re: led swap
Post by: sakobatoneko on May 20, 2008, 04:00:15 PM

i just did it like the phat led swap i soldered the charging led to the bottom points and then soldering the negative side of the on led on the last point, then i just got a lil wire and connect the bottom (4.9v)point to the positive led side of the on led.
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fxs216.xs.to%2Fxs216%2F07242%2Fstep4.jpg&hash=1f4c3f82bea228eb8a3ab3403669783d405c713e)