Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: Jumbo on May 10, 2008, 10:27:29 AM
-
Everytime i solder to the led i put in triggers they dont work. i take them out and the pads for + and - connections rip off. Why??
thanks for help in advance
-
well if the leds are working wen not in the trigger and the solder rips off from the pad u r stretching the wires or its a bad solder
but if the leds work while coinnected just get longer wire cuz ur proly bending or streching it.
-
no it is the whole pad rips off not the solder. maybe im heating up to much and if the leds get stuck to soldering iron(15 watt) for lik 20 seconds they still owrk right??
-
wait wut are u soldering too?
u had ur leds on ur iron for 20 seconds... idk if they still work
but if the whole pad is ripped off ur screwed dude
-
what leds cant get stuck to a solder leds arnt magnatice neither is a solder
-
yes they can :yess:
they dont need to be magnetic, sence thers solder already on the iron the led gets on the solder and viola lol