Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: folklord36 on May 12, 2008, 05:05:06 PM
-
ok im working on the sd mod ill make a tut for the way im doing it but i need help. ok so when u insert a card into the pro duo slot it flicks a switch that tells psp a card is in and starts to read card i know one contact to this switch is the metal caseing of the slot but what is the other i need to know.
-
did u check everlasting_wills duel memory slots
-
no its not in any of his posts
-
I'm not sure how he did it but you can use a Dip switch and solder the ground of the Memory stick slot to the switch and flick to to switch between
-
I'm not sure how he did it but you can use a Dip switch and solder the ground of the Memory stick slot to the switch and flick to to switch between
no dip switches are off/on not on/on and its not that simple thats why will had to use the ic's
-
There's are a guide out now for this and it looks much harder than I thought it would
-
well im not trying to make mine like his, his will hold 2 sticks at the same time and switch between them i just want mine to recognise and read 1 of the 2 i know that without the ic's its imposible to simply put a switch on the ground to switch between them because all the other pins comunicateing . I dont understand is there a switch in the slot that tells the psp that a mem card is in? if so how do i trigger it without a physical card in the slot?
-
There's a pin on the Memory Card slot that tells if its inserted, Its pin 6. I must either make a connection or communicate with the memory card. Pin 6 is also connected to pin 10
-
have you tested it? so ur saying if i wire a switch between pin 6 and 10 and dont put a mspd in slot and wire my sd to produo adapter to the produo slot then when i flip switch psp will read the sd card?