Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Slim (2000) => Topic started by: psp339 on June 04, 2008, 02:00:23 PM
-
Is there a 5v spot on a powerboard of the slim? If so, can that be used for the sound mod instead of the activity LEDs power sources. Last time I soldered to the power source of the memory stick LED, the LED stopped working.
-
Is there a 5v spot on a powerboard of the slim? If so, can that be used for the sound mod instead of the activity LEDs power sources. Last time I soldered to the power source of the memory stick LED, the LED stopped working.
Go here dude.
https://www.acidmods.com/forum/index.php?topic=13495.0 (https://www.acidmods.com/forum/index.php?topic=13495.0)
-
Guys that image is so old. I think from the time I first started using a meter. To answer your question there is a 4.9 volt spot on the PB but when you use it it dims the Power/Charge light so bad. you know if you follow the trace from the Mem and Wifi leds you can get a location to solder to by scraping off some enamal. The reasion your Leds dont light up anymore is cause you fried the resisters (to much heat for to long). I suggest you use a 15watt iron and flux next time (if you wernt before). :victory:
-
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fbeardmods.com%2Facidmods%2Ftuts%2Fpsp%2FPSP%2520Slim%2520Powerboard%2520Info%2520by%25204dP.jpg&hash=79e050161a4910a228ef1ddb4dfc56acc106b198) (http://beardmods.com/acidmods/tuts/psp/PSP%20Slim%20Powerboard%20Info%20by%204dP.jpg)
i just got the voltage from nico and yes when you solder to that point the led will be dim or gone completely
i soldered a powerboard with leds once using the point and the power neg and the power didn't work but charge still did
-
4dp, I think the one green spot you have on the led is actuly 2.8 or 2.6 but I could be wrong its been a long time since I looked. Other then that thats a good image with great info.