Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: VoX on June 04, 2008, 11:06:46 PM
-
Ok, I'm writing a tutorial for the PS1 controller mod, I need to know what you want, Is it the Doc-Oc/f00f00 version or Blizzrad's Single connector version?
-
you should have both
-
it should be single and it should be located on the bottom or back of the psp not the side
-
just show all the wiring than split the tut in a point where you can make it into a doc oc or single connector
-
foofoo has a nice look but the other has a sleeker look
-
i do like F00f00's ps1 control mod but the single connector looks cleaner. sorry F00f00 but single connector all the way! :tup:
-
Single connector pros
-easier to install
-one wire to connect
Multiple connector pros
-Can be used for other things like single analog stick
-smaller
-
The multiple connectors is easier to install because it is easier to solder to, The single connector can go down to an SMD level
-
doc oc style. easier to do, looks cooler, and im sure the mini usb plugs are held in more tightly than the big 25 pin connector
-
Completely new connectors :)
Or
If you can get the single connector anywhere but the top then use it if not original doc oc FTW!
Turns more heads =]
-
Yeah, I might go Doc Oc, Seems cool and easier for people to do
-
Good choice IMO it jsut is plain better than single connector =P
-
Yeah, It's easier for people to do and easier to route the wires around the PSP. Its suits the tutorial more
-
TBH i still wonder hwo blizzrad was able to close his PSP with wires running everywhere =P
-
Yeah, He posted some pictures of how he routed it in his topic, it is possible, but it will take alot of time
-
well there you have it.
Doc-Oc...
Original and best :winker:
-
Still 50/50, so I wont stop the voting yet, Keep voting people