Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Slim (2000) => Topic started by: MadMax11 on June 14, 2008, 01:51:35 PM
-
I'm doing a speaker mod and the solder point on the power board is tiny! I need a picture of another 5V solder point, on the mobo, that is relatively easy to solder to. Thanks!
-
Use a multimeter to test for 5v points, it is easier than looking for documentation
-
there is no 'easy' solder points on the slim. the mobo points are just as small, but here's a pic of it anyway.
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi57.photobucket.com%2Falbums%2Fg219%2Fl0rdnic0%2FPower-1-1.png&hash=42f0799907d6df65d496ef54fae7d8fb71e9eb4e)
-
i tried looking for 5v points and the mobo and only found 2 the one from nicos tut and another resistor then the rest are 2. something and i think 3v
-
you see the resistor in nico's tut? you can scratch that long trace to the right of that resister (the one that goes from the resistors to the top middle of the picture). just scratch that and solder there. works good
-
you see the resistor in nico's tut? you can scratch that long trace to the right of that resister (the one that goes from the resistors to the top middle of the picture). just scratch that and solder there. works good
That, was extremely useful...