Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => PS3 => Topic started by: Nemesis on June 15, 2008, 05:06:08 AM

Title: R2 trigger moving on its own
Post by: Nemesis on June 15, 2008, 05:06:08 AM

well i soldered a wire to the R2 trigger pin on the connector, i de-soldered it and happened to get some solder on the pin next to it, meaning theres solder covering the 2 pins, would this be causing the R2 trigger to be moving/pressing on its own?

thanks

Title: Re: R2 trigger moving on its own
Post by: light_matt on June 15, 2008, 05:53:57 AM

Uve soldered R2 and R1 together de-solder them or clean it up, because it wont functions properly, sometimes it can press triangle, circle and X on its own because the ground circuit is joined up to it.

Title: Re: R2 trigger moving on its own
Post by: Nemesis on June 15, 2008, 06:04:24 AM

well i spent ages because all i have is desoldering braid which i cant use properly but i just managed to split the joint completely and now it works perfectly

thanks a bunch

p.s: you have msn? you know a lot about the sixaxis and i have a few questions

Title: Re: R2 trigger moving on its own
Post by: light_matt on June 15, 2008, 06:20:09 AM

I PM you.