Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: j.s2ghetto on June 18, 2008, 09:04:50 AM
-
I need help
i am working on the leds with ic chip and when i put the lcd cage on with the screws and try to turn on my psp it just blinks idk wats up but with out the cage it works like a charm
this has never happend to me before but it is getting me really angry can anyone help me out i would really appretiate it
-
it has to be shorting out somewhere, do one screw at a time and check to see if it turns on. find out which screw is causing the short and try using electrical tape on all your uninsulated parts of the wire. happened to me and i just put electrical tape over the part where i soldered the wire to the speaker and it worked. hope i helped
-
whare did u put it? It might be the Speakers shorting or the wifi board
-
wat u mean were i put it the ic then it is in the umd door but ther isn't a umd drive there so it shouldn't be that
-
my best advice use transparent tape and tape the entire back of the LCD cage:)