Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: psp339 on June 19, 2008, 11:56:35 PM

Title: Sandpaper used for UMD door
Post by: psp339 on June 19, 2008, 11:56:35 PM

What grit sandpaper is needed to make that perfect circle when I want to put in a jewel?? I bought 320 grit a while ago and its too fine to sand away the extra plastic.

Title: Re: Sandpaper used for UMD door
Post by: tmandt on June 20, 2008, 12:19:22 AM

try to get a rough one but not to rough. the best way that i found out to make a perfect circle is to take the silver ring off get a drill and drill holes between the door and the psp logo and once done just snap it off and then just sand away and your done. works for me. oh btw this will only work with oem doors not the cheap 3rd party ones. if you need hlep just pm me or message me on msn aite! =) i like your mario and bannana lol

Title: Re: Sandpaper used for UMD door
Post by: GhoSt on June 20, 2008, 12:33:50 AM

yea dont know the exact grit but get a rougher one to start and work youre way down to a insainly fine one.

Title: Re: Sandpaper used for UMD door
Post by: Luke on June 20, 2008, 01:28:25 AM

garnet

Title: Re: Sandpaper used for UMD door
Post by: psp339 on June 20, 2008, 02:45:09 AM

Should I use around 100-200 grit?? I'm going to buy some at walmart soon.

Title: Re: Sandpaper used for UMD door
Post by: ryan0 on June 20, 2008, 07:25:14 AM

i'd go with about 250 grit,its fine but the extra work is well worth it cos u get a much cleaner result

Title: Re: Sandpaper used for UMD door
Post by: psp339 on June 20, 2008, 01:34:24 PM

Quote from: ryan0 on June 20, 2008, 07:25:14 AM

i'd go with about 250 grit,its fine but the extra work is well worth it cos u get a much cleaner result

thanks, i'll try to find some 250 grit at walmart soon.