Acidmods

Acidmods Gaming Area => Console Games => PSP Software & Gaming => Topic started by: sdrepin on June 23, 2008, 02:37:36 PM

Title: help on updating firmware
Post by: sdrepin on June 23, 2008, 02:37:36 PM

Hey im currently upgrading my firmware from 3.52 m33-3 to the 3.90 m33 but when the installer started it said unpacking good/ then its been loading on the please wait.... for like 30min now does it take really long or what? help please

Title: Re: help on updating firmware
Post by: pax on June 23, 2008, 02:40:50 PM

you need to be on atleast 3.52m33-4 before you can update to 3.90m33, then after that update to the latest 3.90m33-3

Title: Re: help on updating firmware
Post by: sdrepin on June 23, 2008, 02:44:22 PM

so should i turn off my psp if it already started will anything bad happen?

Title: Re: help on updating firmware
Post by: sdrepin on June 23, 2008, 02:49:24 PM

IT SAYS:
3.90 M33
--------

Requeriments:

- Installation requires a PSP with 3.52 M33-3 or higher.

Instructions

- Copy the UPDATE folder into /PSP/GAME/
- Get the 3.90 sony update from somewhere, and put it in same folder, with name "390.PBP".
  Alternatively, you can let the installer to download for you via wifi.
- Run it, the update will be done by Sony updater. At the end when you are asked to reboot the
PSP pressing X or O, do it.

Title: Re: help on updating firmware
Post by: pax on June 23, 2008, 03:05:28 PM

here check this site out, http://forums.afterdawn.com/thread_view.cfm/616311 (http://forums.afterdawn.com/thread_view.cfm/616311) follow the guide and apply the 3.52m33-4 update, then run MUX 2.0 program and follow the instructions. i've done 20+ psp's with this guide and not a single problem when updating from 3.52m33-4 to any higher firmware. its pretty self explanatory but if you need more help just ask.

Title: Re: help on updating firmware
Post by: sdrepin on June 23, 2008, 03:15:16 PM

Ok well my question is im Still on the Loading screen if i turn off my psp nothing bad will happen???

Title: Re: help on updating firmware
Post by: pax on June 23, 2008, 03:19:34 PM

has it started the SCE updater? if so and you turn off the psp it will brick it, so u will need a pandora. if it hasn't, its still on the black screen with white writing im not sure.

Title: Re: help on updating firmware
Post by: sdrepin on June 23, 2008, 03:23:24 PM

ok thx man i restarted it and it went back to normal 3.52 m33-3 so just to make sure i need 3.52 m33-4 and i can go straight to 3.90 m33 fine? thanks again 

Title: Re: help on updating firmware
Post by: sdrepin on June 23, 2008, 03:42:39 PM

ok well i figured it out i had to change my kernel settings thanks man

Title: Re: help on updating firmware
Post by: pax on June 23, 2008, 04:10:58 PM

 no problem if you need any more help just ask.