Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Slim (2000) => Topic started by: folklord36 on June 24, 2008, 12:42:07 PM
-
ok so im probably the worst umd door remover ever i break them all the time so i was almost tempted to not even try on my new slim.but i did and couldnt do it with a screw driver from the inside i felt like i was about to break the peg before door comes off. so i started thinking how to do it i decided to stick my thumb way into the umd drive to the bottom from the top and put fingers on each side of door on the outside then i bent the umd door out to bow out away from psp and push it to the left as you bend and it will come right off the peg idk if this has been brought up just thought id share my experience this was on a white starwars slim
-
lol folk watch the door overtime will crack at the top
-
Now that I got my second psp, I might swap em :D Thanks for the tip!
-
It actually isn't thathard to take out when you psp is apart. It might seem like its going to break when you follow telekenetics instructions, but it won't(well it didn't for me)
-
When I installed 2 clear cases, I only the broke the 2 original silver cases but not the clear door.
-
The clear case has a looser UMD door which makes it a lot easier to take off. You can really just grip it and pull it off. It won't ever come off accidentally though, which is of course a good thing. :victory: