Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP Phat (1000) => PSP's => PSP Duel Nub. => Topic started by: j.s2ghetto on June 30, 2008, 04:03:27 PM
-
i got a razor x board and i assembled it with a spring and nothing it doesn't work :cry2: can some one tell me wat is up and possibly help me fix it
-
Make sure all you conections are super CLEAN and when you do a razor you should lift the pad a lil bit so the spring makes better contact. But only the pads on the sides.
Oh and you probly know this but make sure its grounded correctly because i had a problem that my razor didnt work and its because the ground wire broke.
Good luck :tup:
-
thanks
-
No problem,
If thers still problems post again and ill see if i can help :tup: